DIN 2391 ST52 Stainless Steel Elliptical Tube / Thick Wall Steel Pipe For Fluid

DIN 2391 ST52 Stainless Steel Elliptical Tube / Thick Wall Steel Pipe For Fluid

Quick Detail:

The seamless stainless oval pipe be make by seamless stainless round pipe

Grade:ST 52,stainless steel, alloy steel and special steel
Metric size:Inside diameter from 40 to 1000mm (skiving tube ID max 500mm),
Max length 20m.
Straightness: 0.5 /1000Tolerance EXT: DIN 2391
Tolerance INT: ISO H8
Roughness(Ra): 0.2 to 0.4µ

Min outsider diameter: 40mm

Max outsider diameter: 1000mm

Wall thickness: 10mm to 100 mm

If the customer have special requirements in sizes,we would like to listen and discuss with customer's ideas

The type of pipe,we can supply: Elliptical Pipe,Square Tube, Rectangular Tube

Description:

The Steel Grade,we can supply:

1.4301/ SUS304/ AISI304/ S30400,

1.4306/ SUS304L/ AISI304L/ S30403,

1.4404/ SUS316L/ AISI316L/ S31603, etc.

1. Type: Oval | Elliptical
2. Marking: Registered logo,Heat Number,Steel Grade,Standard,Size
3. Packing: Plastic bag in bundle
4. H.S Code: 7304.4190 ( For seamless oval / elliptical pipe )
5. Ordering Information: It shall be the responsibility of the purchaser to specify all requirements that are necessary for products under this specification. Such requirements to be
6. considered included,but are not limited to,the following:

1). Quantity ( feet, meters, or number of lengths )

2). Name of material ( seamless tubes )

3). Steel Grade ( Table2 )

4). Size ( Table1 )

5). Length ( specific or random )

6). Condition ( hot finished or cold finished )

TABLE1 Sizes for Elliptical Or Square & Rectangular Tube

TABLE 2 Chemical Composition Limits,% A,for Austenitic and Ferritic Stainless Steel